The Phillips curve (A Level Economics) joins two macro objectives that pull against each other: low inflation and low unemployment. Push unemployment down with extra demand and inflation rises. Squeeze inflation and unemployment rises. That is the short-run trade-off. The long-run version says the trade-off disappears once people expect the inflation. This page covers how inflation and unemployment are measured, their causes, the types of unemployment and the policy for each, both Phillips curve diagrams, a CPI worked example and three exam-style questions with the answers derived.

Spec map: where inflation, unemployment and the Phillips curve sit on your board

Board Where it sits Papers that test it
AQA 7136 4.2.3.2 employment and unemployment (claimant count and Labour Force Survey, voluntary and involuntary, seasonal, frictional, structural and cyclical, real-wage and the natural rate). 4.2.3.3 inflation and deflation (demand-pull and cost-push, expectations, MV = PQ, consequences). 4.2.3.4 conflicts between objectives: “both the short-run Phillips curve and the long-run, L-shaped Phillips curve” and their implications for policy Paper 2, Paper 3
Edexcel 9EC0 Theme 2: 2.1.2 inflation (CPI calculation and limits, RPI, demand-pull, cost-push and money-supply causes, effects). 2.1.3 employment and unemployment (claimant count, ILO and LFS, structural, frictional, seasonal, demand-deficient and cyclical, real wage inflexibility). 2.6.4 conflicts and trade-offs: “short-run Phillips curve” Paper 2, Paper 3
OCR H460 Component 02: 2.3 employment (LFS and claimant count, causes and consequences). 2.4 inflation (CPI and RPI, “calculate the rate of inflation using index numbers”, causes and consequences). 2.8 the Phillips curve: the natural rate and NAIRU, “short-run and long-run Phillips curve”, its usefulness to policymakers Component 02, Component 03
Cambridge International 9708 AS 4.5 unemployment (frictional, structural, cyclical, seasonal, technological) and 4.6 price stability (CPI, demand-pull and cost-push). A Level 9.3 (natural rate, hysteresis) and 10.2.5 “traditional Phillips curve; expectations-augmented Phillips curve (short- and long-run)” Paper 2 (AS), Paper 4 (A Level)

Section numbers are from the AQA specification (the PDF numbers these sections 4.2.3.x, the web version 3.2.3.x), the Edexcel specification (Issue 2), the OCR specification (v3.0, June 2026) and the Cambridge syllabus for 2026 to 2028, all checked in September 2026. Edexcel names only the short-run curve; the other three want the long-run one too. The AD/AS diagram that sits behind all of this is on the aggregate demand and aggregate supply page.

What you must be able to do

Measuring inflation: the CPI and the RPI

Inflation is a sustained rise in the general price level. The Office for National Statistics measures it with the Consumer Prices Index. Statisticians price a basket of goods and services each month, weight each item by its share of household spending, and turn the total into an index. The inflation rate is the percentage change in the index over twelve months.

CPI RPI
What it is The official measure and the Bank of England’s 2% target The older measure, still used for some rail fares and index-linked bonds
Housing costs Excludes mortgage interest and council tax (the CPIH variant adds owner-occupier housing costs) Includes mortgage interest, council tax and house depreciation
Formula Geometric mean within each item group: allows for shoppers switching to cheaper brands Arithmetic mean
Result Usually lower than RPI Usually higher; no longer a National Statistic
Common limits The basket is an average household; it lags changes in what people buy; quality improvements are hard to separate from price rises The same, plus a formula that overstates inflation

Key terms: Deflation is a falling price level: the inflation rate is negative. Disinflation is inflation falling but still positive: prices still rise, just more slowly. Inflation dropping from 4% to 3.6% is disinflation, not deflation. Examiners test this every year.

Causes of inflation: demand-pull and cost-push

Demand-pull inflation Cost-push inflation
The cause Aggregate demand rising faster than the economy can supply Costs of production rising and firms passing them on
Diagram AD shifts right along SRAS: price level up, real GDP up SRAS shifts left: price level up, real GDP down (stagflation)
Typical triggers A consumer boom, cheap credit, a fiscal boost, a fall in the pound raising export demand Energy and commodity prices, wage rises above productivity, a fall in the pound raising import prices, higher indirect taxes
Where it starts on the Phillips curve Low unemployment: the economy is near capacity, so extra demand goes into prices Any level of unemployment: the 2022 spike came with energy prices, not a boom
Policy that fits Contractionary demand-side policy: higher interest rates, tighter fiscal policy Harder: demand-side policy makes the fall in output worse; supply-side policy and time

Edexcel also lists growth of the money supply as a cause: too much money chasing too few goods, the monetarist view summed up in MV = PQ. Expectations matter for both types. If workers expect 4% inflation they ask for 4% pay rises, and firms who expect it raise prices in advance. Expected inflation becomes actual inflation, which is the key to the long-run Phillips curve.

Unemployment: measures and types

The UK has two measures. The claimant count is the number claiming unemployment-related benefits: cheap and monthly, but it misses people who do not claim. The Labour Force Survey uses the International Labour Organisation definition: without a job, available to start within two weeks, and actively looking. It is the official rate. Under-employment, people working fewer hours than they want, appears in neither.

Type Cause Example Policy that fits
Frictional Time spent between jobs; searching and matching A graduate looking for a first post; someone who has just quit Better job information, shorter benefit waits; some is normal and healthy
Structural The skills or location workers have no longer match the jobs that exist Coal, steel and shipbuilding areas; high-street retail after online shopping Retraining, education, relocation grants, regional investment: supply-side policy
Cyclical (demand-deficient) A negative output gap: not enough aggregate demand for full employment The 2008 to 2009 recession Expansionary demand-side policy: lower interest rates, fiscal boost
Seasonal Demand for some jobs falls at certain times of year Tourism in winter, farm work outside harvest Diversifying the local economy; hard to remove entirely
Real-wage (classical) Wages held above the market-clearing level A minimum wage set too high in a low-productivity region; strong union agreements Labour-market flexibility; controversial
Technological Machines replacing workers (a form of structural; named by Cambridge) Self-checkouts, automated warehouses Retraining and education

The natural rate of unemployment is the unemployment left when the economy is at full employment: the frictional and structural parts. It is where the long-run Phillips curve stands. OCR’s NAIRU, the non-accelerating inflation rate of unemployment, is the same idea named for what happens if you push below it.

The short-run Phillips curve: the trade-off

Plot inflation against unemployment and the short-run curve slopes down. Lower unemployment goes with higher inflation. The reason is the AD/AS diagram turned sideways: a demand boost raises output and cuts unemployment, but it also raises the price level. The curve is convex. The closer the economy gets to full employment, the more inflation each extra job costs.

The short-run Phillips curve: the trade-off between inflation and unemployment Inflation (%) Unemployment (%) 0 A B D demand boost: less unemployment, more inflation downturn: more unemployment, less inflation SRPC 2.5 5 8 2 4 1.25
Figure 1 — Short-run Phillips curve diagram: a demand boost moves the economy up the curve from A (5% unemployment, 2% inflation) to B (2.5%, 4%); a downturn moves it down to D (8%, 1.25%). Lower unemployment is bought with higher inflation.

At A unemployment is 5% and inflation 2%. Boost demand and the economy climbs to B: unemployment 2.5%, inflation 4%. Let demand fall and it slides to D: unemployment 8%, inflation 1.25%. Note the shape. The first percentage point off unemployment (5% to 4%) costs half a point of inflation. The next one and a half (4% to 2.5%) cost one and a half points.

Mark scheme: Axes labelled “Inflation (%)” and “Unemployment (%)”, a downward-sloping convex curve labelled SRPC, and a movement along it with both points labelled. The analysis sentence: “the fall in unemployment is achieved only at the cost of higher inflation, so the two objectives conflict”.

The long-run Phillips curve: expectations and the natural rate

The trade-off in figure 1 works only while people are surprised by the inflation. Once workers and firms expect 4% inflation, they build it into wage claims and prices. Real wages fall back to where they were, the extra jobs disappear, and unemployment returns to its natural rate. The economy is back at 5% unemployment, but now with 4% inflation. The short-run curve has shifted up.

Short-run and long-run Phillips curves Inflation (%) Unemployment (%) 0 A B C LRPC SRPC₁ (πᵉ = 2%) SRPC₂ (πᵉ = 4%) 2.5 u* = 5 2 4
Figure 2 — Long-run Phillips curve diagram: A (5%, 2%) to B (2.5%, 4%) along SRPC₁, then to C (5%, 4%) as expectations catch up and the curve shifts to SRPC₂; the LRPC is vertical at the 5% natural rate.

Join the long-run points A and C and you get a vertical line at the natural rate. That is the long-run Phillips curve, the expectations-augmented version, AQA’s “L-shaped” curve. Its message: there is no long-run trade-off. Demand management can only pick the inflation rate at which the economy sits at its natural rate. To get unemployment down for good, you have to move the natural rate itself, with supply-side policy that cuts frictional and structural unemployment.

Common mistake: Drawing the long-run curve and then saying unemployment “cannot change”. It can. The natural rate moves when the labour market changes: better training lowers it, a shift in skills demanded raises it, and after a long recession hysteresis can raise it too. The LRPC is vertical, not fixed.

Worked example — building a price index and reading the inflation rate

A small economy’s basket has three groups. Food takes 30% of spending, housing 40% and transport 30%. Prices are indexed so that each group is 100 in year 1.

  1. Year 2 prices: food up 6% (index 106), housing up 4% (104), transport up 2% (102).
  2. Weight them: CPI = 0.3 × 106 + 0.4 × 104 + 0.3 × 102 = 31.8 + 41.6 + 30.6 = 104.0.
  3. Inflation in year 2 = (104.0 − 100) ÷ 100 = 4.0%. Housing has the biggest weight, so its 4% rise counts most.
  4. Year 3 prices: food 110, housing 108, transport 105. CPI = 33.0 + 43.2 + 31.5 = 107.7.
  5. Inflation in year 3 = (107.7 − 104.0) ÷ 104.0 = 3.6% (to one decimal place). Prices are still rising; the rate has fallen. That is disinflation.
  6. A worker’s pay rose 3% in year 2. Real pay changed by roughly 3% − 4% = −1%. The exact figure is 1.03 ÷ 1.04 − 1 = −0.96%. A pay rise below inflation is a real pay cut.
  7. Link to the Phillips curve: if this economy sat at A on figure 1 and inflation rose to 4%, unemployment had fallen towards 2.5%, point B. If the 4% came from energy prices instead, the curve itself shifted up: cost-push moves the curve, demand-pull moves along it.

Exam-style questions

Q1: The consumer prices index rises from 130.0 to 135.2 over a year. Calculate the rate of inflation and explain one limitation of the CPI as a measure of the cost of living for a pensioner. (4 marks)
A: Inflation = (135.2 − 130.0) ÷ 130.0 × 100 (1) = 4.0% (1). The CPI basket and weights are those of an average household (1). A pensioner spends a larger share on heating and food and nothing on commuting, so a rise in energy prices raises their cost of living by more than the CPI shows (1).

Q2: Using the short-run Phillips curve in figure 1, describe what happens to inflation as unemployment falls from 5% to 4%, and then from 4% to 2.5%. Explain what the long-run Phillips curve predicts if the government holds unemployment at 2.5%. (6 marks)
A: From 5% to 4% unemployment, inflation rises from 2% to 2.5%, half a percentage point (1). From 4% to 2.5%, inflation rises from 2.5% to 4%, one and a half points: the curve is convex, so each extra cut in unemployment costs more inflation (1). Holding unemployment below the natural rate of 5% needs a bigger demand boost every time (1). Once workers expect 4% inflation the short-run curve shifts up and unemployment returns to 5% at 4% inflation, point C on figure 2 (1). Holding it at 2.5% again would shift the curve up again, to 6% inflation at the natural rate (1). The long-run curve is vertical: the government gets accelerating inflation and no lasting fall in unemployment (1).

Q3: Evaluate the view that there is no trade-off between inflation and unemployment. (25 marks)
A: Two points for, two against, and end on a supported judgement.

Examiner’s checklist: the mistakes that lose Phillips curve marks

Key takeaways

FAQ

Q: What is the Phillips curve in A Level Economics?
A: A diagram showing the relationship between inflation and unemployment. The short-run curve slopes down: lower unemployment goes with higher inflation. The long-run curve is vertical at the natural rate of unemployment, because once people expect the inflation the extra jobs disappear. Figures 1 and 2 are the two versions.

Q: How is inflation measured at A Level Economics?
A: By the Consumer Prices Index. A basket of goods and services is priced every month, each item weighted by its share of household spending, and the inflation rate is the percentage change in the index over a year. The worked example above builds one from three groups.

Q: What are the types of unemployment at A Level?
A: Frictional (between jobs), structural (skills or location no longer match the jobs), cyclical or demand-deficient (a negative output gap), seasonal and real-wage. Cambridge adds technological. The table above gives the cause and the policy for each.

Q: What is the difference between demand-pull and cost-push inflation?
A: Demand-pull inflation comes from aggregate demand rising faster than supply: AD shifts right and output rises with prices. Cost-push comes from higher costs of production: SRAS shifts left and output falls as prices rise. The 2022 UK spike was mainly cost-push, driven by energy prices.

Q: Why is the long-run Phillips curve vertical?
A: Because the short-run trade-off relies on workers being surprised by inflation. Once they expect it, they demand matching pay rises, real wages return to where they were, and unemployment goes back to the natural rate. Every attempt to hold unemployment below that rate just adds to inflation.

Q: Which questions come up on inflation, unemployment and the Phillips curve?
A: An inflation-rate calculation from index numbers for 2 to 4 marks, “explain, using a diagram, the short-run trade-off” for 4 to 8 marks, and a 15 or 25-mark evaluation of whether the objectives conflict. Paper detail is on the AQA, Edexcel and OCR pages; both Phillips curve diagrams are on the A Level economics diagrams page, and the revision hub lists the rest of the macro topics.

Make the trade-off earn its marks

If disinflation still comes out as deflation, or the long-run curve turns up without a natural rate, one lesson fixes that. Send your board, your year and the paper date, and a first lesson time will be with you inside a day. Pricing is on the A Level economics tutor page.

Book a lesson

Book your first one-to-one lesson

Tell me your exam board, your year and what you are stuck on. I reply within 24 hours to set up a first session. Every lesson is online, one-to-one, and built around your next paper.